Insulation of the bath with polyurethane foam

The insulation of the bath is always one of the most important points in the process of its construction. Today it is difficult to imagine a suburban personal or cottage land plot on which a bathhouse would not be built. It is no secret that the adoption of water procedures in the bath in the most favorable way affects the human body, it relieves any tension, helping to relax perfectly. After visiting the bath, a person begins to feel a surge of strength. But for the construction of a miracle, the first thing you need to choose the right building material, and then competently use it. It is not rare that mineral wool or polyurethane foam is used as a heater. Where to buy polyurethane foam can be found on the site. The second option today, according to experts, is the most optimal, firstly because when using polyurethane foam, there is no need for fasteners during installation. Secondly, when warming the bath with polyurethane foam, you can not do waterproofing, since the insulation is monolithic and seamless, it completely absent gaps and joints. Thirdly, this insulation is able to withstand high thermal loads. And the last, polyurethane foam has an effective service life of at least four decades.

After the walls of the bathhouse, it is necessary to proceed with their insulation, and before starting laying the upper floor, it is also necessary to lay the polyurethane foam. Under the pair compartment, the floor is not necessary. Insulation should be laid on all surface of the walls in the room of the steam room. After that, a layer of foil is laid on it, which can be fixed with construction tape. Polyurethane foam as a heater of the walls is used in the dressing room. After that, the walls and ceiling are sheathed, for example, lining.