Waterproofing, general information

Waterproofing can be carried out using a variety of materials. The glued insulation can be made of sheet, as well as roller types of material. Hard insulation is performed using polymer and metal sheets. The fastening for such material uses hard fasteners, they are fixed using welding work or strong bolts.

If you decide to do rhinoplasty for yourself. Then we advise you to contact professionals in rhinoplastics that you will find on the site — . Also, for those who do not know what rhinoplasty is, go by the link indicated by us and you will learn a lot of useful and interesting information about rhinoplasty and t. D.

The painting type of waterproofing is applied using spray guns or brush. This type, after the paint material is applied to the hard surface, acquires a lumpy form, thereby protecting the base of the material from moisture penetration inside.

In order for the surface with different types of waterproofing to be uniform, it is necessary to make strong seams between the materials. For example, the pasted and paint waterproofing must be combined by gluing. Strips of these materials should be at least 50 centimeters each.

Bitumen and polymer waterproofing, as well as other materials are attached to each other by one. The size of this on the whip has a width of 40 centimeters.

Metal waterproofing is fixed to the concrete surface in the same way on the face of one, but it is fixed using anchor bolts. The size of the width per whip is 10 centimeters.