Paul coloring

Floors from boards can be painted with oil paints. Oil paints can serve you a good service. Before starting work, the paint should be checked for the ability to dry. The paint prepared for use should be applied to the plank or plywood with a small spot size of the palm and grind. Sample should be kept for two days. If the paint does not stick to the hands, then this paint is high -quality, and it can be used. If the paint stuck to the hand or has not dried at all, then such a sample should not be used in work.

Dear readers of our site, if you want to order a house from a profiled turnkey bar. Then we advise you to go on the link that we specified, there you will find the best builders and you can see the photos of the houses that they cost.

Paint is applied in thin layers in several visits. Apply and shade the paint thoroughly. In the process of painting, bubbles or wrinkles can appear on the floor — this means that a thick layer of paint was applied, plus the material consumption increases, and the quality worsens noticeably. Double layer of paint for one kV. meter requires 200-300 grams, triple layer-250-280 grams. Before painting, the floor must be washed well and dry. Cracks or cracks can be covered with special mastic, gently smearing and smoothing. After mastic, you can grind with a skin to give smoothness.

To maintain cleanliness, the floor must be washed with warm or cool water. Soap and especially soda should not be added, this leads to the destruction of the paint, and the loss of its shine .