Corrugated board for the roof

To cover the roofs as roofing material, you can use corrugated board — in fact, a real professional sheet steel material covered with a layer of special polymer or zinc. Corrugated board for roofs can be made in a variety of configurations and different heights. For roofs of various shapes, you can choose the most optimal material. By the way, you can currently purchase waterproofing materials for the roof on the site — . Pass the link for more information from the indicated link.

Before construction work, it is necessary to carry out all roof measurements, for a more accurate calculation of the required amount of corrugated board. Do not forget that with quite large slopes, characterized by an angle of inclination of 14 degrees or more, you will have to lay overlapping (about 20 cm) sheets. The smaller the angle of inclination, the less overlap will be. However, with a very small angle, silicone may be required to better seal joints.

When working with corrugated board, it is necessary to work in special gloves and clothes, you should dress protective glasses on your eyes. Shoes should be soft to reduce sliding along the corrugated board. By the way, when walking, you need to step into a hollow, otherwise, the material can bend and lose its appearance. And finally, roofing work, no matter how easy they seem, require insurance, so the use of the safety belt will not be superfluous.