We hide electric wires in the wall

When replacing or conducting a new electrical wiring, all wires must be hidden. You can use the cablekanal, which is attached over the wall and it can be seen around the entire perimeter of the conducted electrical wiring. This method is most suitable for factories, medical institutions, schools, etc. And in houses and apartments, this device will spoil the entire interior. Therefore, in order to reliably hide the electric wires from human gaze, you can use the following method.

We take a grinder with a diamond circle or perforator and make grooves with a depth of 1 cm and 1.5-2 cm wide. All wires will hide in them. Clean the grooves from the piercing punch obtained during work and lay the wires in them. Using plastic brackets, fix the electric wires. Thus, the wiring is attached in all grooves. All bare sections of the wires should be insulated so that they do not touch each other. Now dilute a small amount of putty or construction gypsum and put all the grooves. But remember that working with gypsum should be very quickly, as it begins to harden already 5-10 minutes after kneading.