Repair of concrete steps

Concrete steps during operation are subjected to damage. Particularly vulnerable places are their edges. Therefore, it is necessary to periodically carry out repair of concrete steps. To close up minor defects, cracks should be used by rapid cement. Conducting such work is quite simple. For this, a spatula is used, with which the usual loaf of defects is made. The solution is prepared in the ratio of one part of the cement and three parts of the sand. After applying the solution, the surface should be rubbed.

In this case, the plaster grater should be used. To more increase adhesion, it is necessary to first apply a layer of PVA glue to the surface of the damaged section of the step. To restore the edges of concrete steps, it is necessary to build the formwork. For this, as a rule, wooden boards or moisture -resistant plywood are used. After the formwork is installed, apply the solution to the damaged section of the step and leve it, using the upper formwork cut as a guide. In order to avoid injuries, it is necessary to make the surface of the renovated step a rough. To do this, it is enough to draw a broom on the surface or a broom on the surface.