Repair of door bindings and doors

If the windows, castings, window sills, platbands and boxes are incorrectly, they will soon begin, begin to rot and dry out. In this case, they cannot be repaired, but only to replace them. Doors and bindings must be made in such a way that in the narthex they have leaks in size 2 or 2.5 millimeters. The internal doors are not recommended to be tightly hung to the floor.

In this case, there should be a distance of at least 10 millimeters between them so that any coating is possible, to lay down, which will not interfere with the opening and closing of the door.

In the apartment or in the house, thresholds do not need to be done, as this happens in houses only chopped. Above the floor level lift the bar in other cases by 15 millimeters, and at the entrance only at the doors.

Good use is different sizes of screws for repairing doors and bindings. Such screws come with a secret, semicircular, as well as a half -hearted head. Their length is 7-120 millimeters, and the thickness is 1.6-10 millimeters, but the diameter of the head is 3-20 millimeters. When wrapping the screws, there are slots in the head, having different lengths and depth, which can be determined by the size of the screws.