We repair the parquet on our own

The most beautiful and luxurious view of the floor covering is the parquet. Parquet – This is a building material that has a beautiful external surface, has durability, has environmentally friendly materials. However, in order for the parquet to retain its properties for a long time, it is necessary to ensure. It is necessary to carry out a cycle of parquet, as it is wear. This procedure is necessary once in five or eight years. It is mandatory, and is needed so that the parquet does not lose its freshness and initial beauty. In the process of cycles, you remove all cracks, excavations from the floor, change the old varnish.

At the very first moment you need to use a grinding machine. With it, you can remove the old varnish, and the surface thin layer of the tree. Under all this, a new, fresh drawing will be found, which will give the parquet the original freshness and beauty. Such a drawing will upgrade the entire initial atmosphere of your room completely. Next, it is necessary to use a smaller grinding machine, which will more subtly and carefully process the surface. Also, with the help of it, you can process hard -to -reach places, corners. Next, you need to process the gaps. Remove all excess garbage from them, chips. Then they are filled with a special solution. If you have many cracks on your surface, then apply this solution throughout the floor, and then treat it with a skin, with which you will open the drawing again. Then wait until the floor is completely dry, and then apply a varnish on it. It is usually applied to five layers. Each layer must be dried before applying a new. So the parquet will acquire the original appearance.