Repair of a suspended ceiling made of drywall

Everything will be worn out over time and requires repair. The suspension ceiling made of high -quality drywall is no exception. There can be many causes of damage, but this will not be about that. Repair of a hanging ceiling made of drywall will not require much time and effort. To do this, you will need the following tools and materials: overhead plaster, cutting, a piece of plywood, screws, screwdrivers, cutter, square and electric detector.

First, it is necessary to check the surface for the absence of an electric voltage using a detector. Using a square, you need to draw a flat rectangle in a damaged place that will be repaired. Using the cutter, you need to cut the outline of the rectangle. Cut it with a hand saw or knife with a zazubin. From the overhead plaster, you need to cut a rectangle, which will be the resulting window and it is 80-100 millimeters longer than it. The result should be a patch. It will need to be attached to the ceiling with screws. When the design is ready, it should be finished with the same material as on the rest of the surface. At this stage, the ceiling repair can be considered completed.