Facing the building with siding

Siding is decorative panels for facing the outer parts of buildings. It is made of metal and polyvinyl chloride. Siding in appearance differs little from a natural wooden lining, but it is much cheaper and more durable. Ciding is used both for the reconstruction of old buildings and for practical external design of new buildings in all respects. This technology allows you to insulate and protect against the destruction of the facade, as well as accelerate and simplify the finish.

Want to get a window tape, but don’t know where cheaper? Our window tape is perfect for you to buy it you can on our siteck-nullifire. Inexpensive. You will also find a lot of useful information on our site.

The cladding process consists of two parts: the first is the device of the crate, and the second is the installation of the lining. First make a frame from rack 2.5 by 8cm, nailed to the wall by means of nails. Distance between vertical rails 30-40cm. Windows, doors, openings, corners, upper and lower boundaries are also doomed. If desired, a dense insulation is laid between the rails that does not exceed their thickness, which will relieve the “wave” effect. When installing siding, it is important to remember that the PVHPANELES when temperature drops react with expansion and compression in sufficiently large ones (up to 9.5mm) sizes. Therefore, when installing, the lining should move freely. Siding is installed from the bottom up for a pre -attached set of profiles and accessories.