Facing walls and floor with tiles

To level the walls, you need to use plaster.

Finishing work usually begins with a primer. Когда стены сделаны из пористых оснований, должна использоваться грунтовка для оснований, которые сильно впитывают. For dense and smooth walls, a primer is used, which should contain quartz sand. If the walls have a weakened surface, then the primer should have strengthening functions.

Well, to buy cement inexpensive — visit the site. Only there there is high -quality cement at a reasonable price and with fast delivery.

Laying tiles on the base of the floor should start with the center and gradually go to the walls. If the tile has a different format, then the main field must be drawn with narrow strips. This is necessary so that the tile is laid smoothly. You need to knead the adhesive solution and wait 5 minutes, then mix it again. Glue should be applied to the base of the floor and on the back of the tile. Glue is applied with a smooth spatula, after a gear spatula is made after a gear. Glue should be durable and elastic. When laying tiles, it must be slightly pressed into the adhesive composition. To fit the tiles evenly, the level is used. The seams should be even, for better quality, crosses are inserted between tiles. Wall cladding is performed only after the floor laying.

If the tile is placed in the bathroom, then in advance the wall must be leveled with waterproof plaster, and a waterproofing composition is applied on top. Glue should be used that used in wet rooms and pools. Previously, you need to prepare an adhesive solution, which prevents tile sliding. The solution is applied to the wall with a gear spatula. When laying tiles on the wall, it must be shed in a glue solution, for this, a kiyanka is used. Between the rows, spacer crosses are installed. So that the tile is laid evenly the level. When the glue hardens, the seams between the tiles need to be filled with a grout. When it dries, the remains are removed.