Satisfy the walls with boards

It’s not about a private house or bath. And in the apartment it is quite possible to finish part of the wall with boards. This will give coziness and colorful appearance to your room or cabinet. In rooms sheathed with natural wood, it breathes easier, in the heat in them it is cooler, in winter — warmer.

If you want to buy lumber in Ufa, then we advise you to follow the next link. The site offers high -quality Ufa lumber at low prices. Follow the link to get acquainted with the catalog of products.

The boards when lining can be placed in any order — vertically or horizontally. The material can be varnished or painted with paint, at your discretion. It is optimal to use boards 12 cm wide, and in order for the design to look aesthetically pleasing, it is necessary to fasten the boards using decorative screws. There is another way out — drown the nail into the surface of the boards of 2 mm and a hole carefully smear with putty.

If you are going to fix the boards on concrete or brick walls, as a base you must first attach bars to the walls at a distance of 60 cm from each other. If you plan a casing as a heater, then the gap between the wall and the surface of the skin can be filled with a layer of insulating material.

In addition to applying varnish or paint, you can give the boards an interesting look and emphasize their drawing and texture using a soldering lamp. Naturally, firing should be done before the installation of boards on the wall. The varnish is applied to boards in several layers, and each layer must be allowed to dry well. The first layer is the most liquid, after absorption and drying you need to fabard. The second layer is applied with a thicker consistency of varnish. When you feel roughness, you can praise the surface of the board again. As a rule, after the third layer of varnish, a flat smooth surface should be obtained.

After that, your boards can be mounted on a wall in the form of panels.