High -quality door upholstery

In niches, there are many ways of upholstery of the door, as well as materials that are perfect for this purpose. They belong to the leather -altitude, oilcloths and dermatin. Traditionally, the door upholstery process consists of the inner layer (foam, burlod or paper), which creates good sound insulation, as well as external. Most often upholstery is done only from the outside of the door. When performing this work, you should take into account the direction in which the door opens (inside or out), since it is on the same end side that it will be necessary to turn off the upholstery, thus creating a small roller. On the door frame, if desired, you can also make a similar roller that when closing the doors will contribute to even greater tightness.

Want to get a new ceramics for yourself, but don’t know where? We advise you to choose ceramics at a low price. You will also find a lot of useful information on our site.

When calculating the required amount of material for upholstery, you need to not forget to add a piece for allowances, the size of which should not exceed15 cm. The door upholstery process should start by removing it from the loops. Small rollers that are nailed around the entire perimeter need to be made from upholstery. Then foam is rolled in an even layer. Materials that must be in a stretched state are nailed to the finishing nails to avoid the formation of possible folds.