How to attach a laminate

Laminate is a beautiful flooring for the floor, but few know how to correct it to the floor. Of course there are other floor coverings, more precisely, there are several dozen of them, moreover, there are separate technological solutions as flooring. But not one of them is popular as a laminate, at least in the Russian Federation. In no case should you nail and glue the coating (more precisely laminate) to the floor. The coating is held in the right position under its own weight (this is a pure physics, or rather the power of land attraction). But there are two ways to fasten the laminate panels between themselves, adhesive and bloodless. Both have their nuances. In the adhesive method, special glue designed precisely for the installation of laminate and many other devices, this method is quite complicated and requires some knowledge and skills. And experts do not recommend laying such a floor on their own. Because if you spoil the flooring, you will have to start all over again.

In the second case, the panels are attached to each other with grooves or spikes, only a saw is required here to cut the panels. The advantage here will be a quick laying of such a gender, and you can also use the floor immediately after it is laid. And if the move is planned, then the floor can be dismantled and taken with you. With an adhesive method, it is necessary to create an even and smooth surface, and it is better to first lay a black floor on a cement screed. How the flat surface will be ready, you can lay a sound -absorbing film, it must be placed, it will hide irregularities, and also jerk off steps. If there is no film, then you can use a cork, this is an environmentally friendly material, but it’s enough for the same.