Repair in the apartment: gluing Lincrust on the walls

The technology of pasting walls with linkstens is largely similar to the technology of sticking wallpaper. First, all switches and sockets, old wallpapers are removed and cracks and other damage are sealed, and the surface is primed. After its complete drying, you can proceed to wall decoration. As a rule, lininkrust patterns require combination, but before that the material should be kept in hot water within a few minutes. The softened lincuruste is cut into strips of the required length in compliance with the correctness of the pattern and leave to be sophisticated for several hours. It should be borne in mind that work should be carried out at a temperature of at least 15 °C and lack of drafts. To ensure even gluing of paintings, it is recommended to apply vertical lines on the walls, which can be noted using the upholstery cord.

For gluing the linkerist, you can use boostilate, perchlorvinyl glue or starch glue with the addition of carpentry. Glue needs to be applied to both the wall and on the linkeruste, which subsequently needs to be folded and withstand for several minutes. Then the canvas is fixed on the wall, focusing on the applied lines, and smoothed out, removing folds, wrinkles and air hit. The following canvases are glued to the end with a thorough combination of the pattern. With the correct performance of work after drying the lininkrust of the gaps between the joints does not remain. Otherwise, it is necessary to eliminate them using a half -oil putty. After completely drying the glued bands (5-7 days), the walls in one or two layer are painted with paint.