Roof replacement. Installation of plywood

When you go to the house, of course, the first thing that catches your eye is the roof. If the roof needs to be replaced, then the most budget option would be to independently lay its. Although all this can take a little more time than you assume, but a significant amount of money will be saved. The first step that you must take is to remove all the old tiles and the former basic plywood from the roof of the house. At the same time, you will need heavy scrap and several hammer. After you removed all the old rubble, make sure that the bare rafters are cleaned. It should be borne in mind that only a well -clean and flat surface is required to lay the plywood base. For materials such as plywood, the price is indicated on the sites of construction companies.

If you have a clean sheet and are ready for the next step, you must measure how many plywood will be required. On 3/4 inches 8 sheets, as a rule, is used because the figure of use is at least ten percent more than you measure. Make sure that plywood is laid correctly, that there are no sections where water can seep or dirt accumulates. Such areas should be adjusted.

To prevent rapid wear of plywood, you need to cover it with a special tool or ordinary varnish for painting a tree, which is sold in stores specializing in construction.

Further, directly, it is necessary to lay the roof, fixing it with screws and nails. Then you need to install the drain that will remove moisture after the rain, which has accumulated there.

The final stage is the use of flexible tiles. It can be of different types, so you should not choose only one that fits your taste, but it is necessary to take into account the features of the area in which you live. Expensive building materials are always of high quality, so you need to determine what kind of quality is required.