Rules for painting the ceiling

The technology of painting the ceiling is not a complicated procedure at all. Everything that is required is to know some nuances that will help in this matter. At the very beginning of the work, it is necessary to apply a primer layer to the surface that will be painted. Most often, diluted water -based paint is used as soil, which will subsequently be used to paint the ceiling. The ceiling needs to be sparkled, sanded, and then painted with ordinary water -based paint.

Dear friends, if you are looking for high -quality laser cartridges. Then we advise you to visit the site-buy-laser-cartridges. RF, there you will find the best laser cartridges and you can buy them at any time at a low price.

It is most convenient to apply paint with a wide brush, roller, or using a spray gun. Begin the ceiling you need to start from its edge. The starting strip should be applied with a brush at the junction of the ceiling and walls where the doorways, windows or other protrusions are located. The following that is required to do is replace the brush with a roller.

The paint must be applied with a strip, the length of which is not less than 1000 mm and the width is 500 mm. Each subsequent strip should be applied to the previous one, making a small overlap several millimeters. It is important to know the moment that the final layer of paint is superimposed on the surface in the direction of the light source, the previous one is perpendicular.