Selection of grouts for seams

There are two types of grout: the first contains only a mixture of pure Portland cement, and the composition of the second is a mixture of sand and Portland cement. Cement grout should be diluted with liquid latex or water, mixing to the necessary consistency. This solution can be used in order to stick and grind the inter -seams, and for the installation of natural and artificial stone.

It is necessary to develop a passport of public railway tracks? We advise you to contact the SDU LLC, which will develop a passport of the path to you in the shortest possible time at a favorable price. The company is also engaged in the construction of ways.

To grind a seam with a width of no more than 5 mm, you need to use the composition of clean Portland cement. If seams are more than 5 mm, it is preferable to use a mixture of sand and cement. But this mixture is not suitable for grinding glazed tiles, marble.

Containing pigments and resin, epoxy grout can be used when grouting seams of any tile. Moreover, it is very resistant to chemicals and moisture. But when working with this type of grout, you need extensive experience, where, if you are incorrectly applied, there will be a problem when cleansing the tile. If the tile is heavy, where the thickness is more than 12 mm, and the ground seams are about 7 mm, then the grout must be purchased based on resin. When working, do not forget about glasses and respirator.

Grouting with furanic resin is only in black, where the seams in production rooms or when grouting inter -tile joints of the floor are finished.