The room where the stretch ceiling is installed should be
If you are going to install stretch ceilings in a particular room, then remember that it must meet some technical requirements.
So, work should be completed to align the walls, installation of air conditioning and ventilation systems, soundproofing is made, lighting issues are resolved, and the measured form and perimeter of the room should not change.
The premises should be well heated in winter, it should not be drafts. It is also necessary to protect it from cold air penetrating through inter -story floors and roofing.
The walls should differ in strength and integrity, and finishing materials, if used, must be reliably fixed and withstand the load up to 60 kg/m.
The main ceiling should be cleaned of elements that can crumble on the ceilings of stretch. Building seams and cracks must be disconnected, made sealed, and the plates are covered with a primer.
If you are planned to be installed in the tension ceiling of communication and devices, then get out the circuit of the line of electrical wiring and communication lines. Items in the room that cannot be taken out should be covered with film, protect the floor with cardboard, and animals and plants are transferred to other rooms.
If lamps are built into the stretch ceiling, then the maximum power of the incandescent lamps should be 40-60 watts, halogen lamps – 35 watts. Up to 100W lamps with incandescent lamps should be placed at a distance of 25 cm from the ceiling to the surface of the lamp.
In the case of installation of transformers, it is recommended to install them not in the laundering space so that there is free access to them. If the transformers are in the lamp, then it will have to every time you need access to them, dismantle and mount the ceiling.
The article uses photographs from the Quadro website, which is engaged in the installation of stretch ceilings in Moscow and the Moscow region, including the ceilings of tension Mytishchi, Schelkovo, Jubilee, Dmitrov, Pushkino, Korolev, Sergiev Posad.
Оставить ответ