Wall decoration with drywall

For those who want to minimize «Wet» The processes of construction work, the ideal method of wall decoration will be the use of drywall.

«Dry plaster» call a plaster in everyday life, on both sides covered with cardboard sheets. This type of decoration will help to avoid tiring alignment of uneven surfaces of the base, which will greatly reduce the working hours. Drywall can be glued directly on the walls or pre -arrange a frame of wooden racks or a metal profile.

For wall decoration, sheets are used 12mm thick. They marked the dimensions, places for holes for sockets, switches, pipes, and all this is cut out before the start of the installation. The edge of the cut is mowed for the subsequent seaming of the seam. To improve noise — and thermal insulation in the intervals between the strips of the frame, you can lay the minvata sheets. Next, the prepared drywall sheets are mounted on it with self -tapping screws at a distance of up to 20 cm. The seams are sealed with gypsum mastic, and the surface of the surface seal is glued. After drying the joints, the joints are put off. The surface of the wall is covered with a primer for subsequent pasting with wallpaper, and underwinning – puts off, then — grinds and primers.