We make cashing windows and doors and j-profile

After installing corner profiles, you need to cash out windows and doors. Windows in houses differ in their location. So mainly the windows in relation to the surface of the outer wall are spilled over a certain distance in the depths of the wall. And in wooden houses and houses from the beam, as well as attic windows are installed flush with the surface of the outer wall of the house. Therefore, the cladding of windows of each option occurs according to its methodology and sequence. Consider the option of winding windows located flush with the outer wall of the house.

Window cladding work begins with the installation of protective aprons made of galvanized steel in the form of plates. These aprons will prevent moisture from lining for the cladding of the facing profile. Fastening using the nails of the protective apron, are made by the upper part of the edge. At the same time, the lower part of the apron remains free, which will further allow you to bend and under this part of the apron to bring the private siding, the Sama, providing rainwater drive directly to the siding panel. Then you need to install the side aprons and the upper part of the protective apron. After that, the Jr.’s J-Profile is installed, which will be used as the platband.