Decorations of walls made of artificial decorative stone

Artificial stone is decorative, in fact, as well as natural origin, it is perfectly used for internal and outdoor decoration. The very principle of styling is the same. Very similar to laying simple ceramic tiles on the walls or on the floor. The same consumables are used: adhesive solution, gear spatula, grout. It can be safely used when laying glue, which is used for laying ceramic tiles, such glue has a wide area of ​​use, is suitable for almost gluing any surfaces, has an increased adhesion coefficient, and the stone will not slide on a vertical surface even on1 mm. The surface itself, which will be faced by a stone, should be strong, since the material is quite heavy, should be absolutely clean and dry. Before laying, the base must be degreased, covered with a special primer and attach the reinforcing network.

It is better to apply glue on one side of the stone and to the surface itself, to the place where the stone will be installed. It is good to lay a small fragment of the drawing near the floor, which then in the same sequence you will transfer to the wall. It is better to put a stone from the elements in the corner first, gradually moving to the center, interspersing the stones of different sizes and shapes, steadily observe the same suture size.