Gluing technology

Consider some of the nuances, it seems like a simple gluing operation: the surface is pre -prepared and degreased (if necessary). If work with metal, then it should not have rust, if stone and concrete — then the surface is thoroughly cleaned of possible dust and dirt, if the tree is removed the upper layer of the old coating; glue is evenly applied with a very thin layer on a pre -prepared surface; glue is applied when working on a small surface with the tip of the tube, when covering large areas with a brush or a gear spatula;

— In certain cases, it is possible to use adhesive pistols for convenience and speed;

— After use, all working tools are cleaned and washed until the glue is hardened on them;

— When working, time is taken into account «Grabbing» glue, this is the time that passes from the moment of application to the moment of hardening;

— You need to take into account the indicator «vitality» glue, this is the moment of time that shows that the peculiar mass is still able to glue;

— accelerate the setting time, you can use additional heating (for example, a hairdryer or heater);

— When gluing small elements, you can not stick to them, the traces of the fingers will significantly worsen gluing.