How to make a veranda in the country?

Having finished construction work on the construction of a wooden house, you should also think about decorating it with some kind of extension, for example, a veranda. Its design should be simplified as much as possible so that the work does not drag out for a long time, and the construction process itself becomes pleasant and the most economical.

The veranda is a building intended exclusively for the warm season, so you should not warm it. It is necessary to start it with the foundation that will have the form of pillars. The depth of the pit for brick pillars should not be less than1 m. It must be remembered that the sand should be poured under each pillar, and put a concrete pillow on it, up to 30 cm deep. All the emergency needs to be filled with gravel.

If you decide to buy and install yourself at home, we advise you to go to the website of the online store. You can evaluate the quality of service of the company that, in order to interest buyers, very often hold promotions.

The frame of the veranda is made of bars, which are fastened with below with the foundation pillars. Then the lags are attached to the bars, which will be the basis for the floor. After that, racks are installed with the help of nails, on top of which there will be rafters.

To create a roof, a steel or roller coating is used, which should be performed at a small angle, unlike the roof of the house. The roofing is laid on the crate from the boards.

Then you can proceed to the lining of the veranda around the perimeter, leaving the openings for windows and doors.