How to restore the enamel of the bath

Restoring the enamel of the bath is not so difficult and, subject to certain rules, even not even a professional can. First you need to get rid of rust. For this, slightly aggressive oxalic acid must be mixed with water to the state of porridge. Then, using a fabric tampon (you can also use foam rubber), the composition must be applied to the entire surface of the bath. After half an hour, an acid coat must be washed off with water. Do not forget about precautions when working with hazardous substances. If after chemical treatment the rust could not be removed completely, it must be removed by mechanically – sandpaper. After washing, it is necessary to let the bath dry completely. Before you start repairing the bathroom with your own hands, consult a specialist, he will tell you where to start and where to buy building materials cheaper.

The next step – applying a primer to the surface of the bathtub. Thanks to the wide selection of this product, including the emergence of a variety of aerosol soils, there will be no problems with this. After the primer dries, it is necessary to apply the enamel itself. It is best to use a can nitroemal, as it contains a smaller amount of solvent in its composition, and, therefore, will serve you much longer than a bath covered with aerosol enamel.