Tile ground grout technology

It is important to crush the seams of ceramic tiles correctly, this is a fairly responsible activity. The work must be done with high quality in order to achieve a more noble appearance, and not to spoil the laying of the tiles, but on the contrary, try to hide some small defects that could form during the masonry. The seams are wiped with two solutions of the solution: a mixture based on epoxy resin or a cement -based solution. Epoxy -based solution consists of epoxy resin and added special hardener. The epoxy solution has a greater viscosity, which creates some difficulties in the work. The epoxy mixture has a high cost, but it justifies itself with increased strength and resistance to various influences.

A solution of grout for tiled seams based on cement compositions may differ in its composition depending on the added additives. Width of the seams: note that the width of the grouting seams can be any, the main personal preferences of the customer are the main thing here. Only some recommendations must be taken into account: for example, very wide seams visually suppress the tile itself; Too wide seams, increase the risk of formation of cracks over time; Too narrow seams are also not recommended — this is due to the fact that it will not be possible to achieve complete filling with a solution of a narrow seam, which will subsequently lead to the fact that water can fall under the seam under the tile itself.